Greenhouse designs are much simpler than any greenhouse. As a rule, a greenhouse has significantly smaller dimensions, it does not need a foundation, it is very easy to install, it is heated by solar heat and oxidative processes of bio-fuel resources. Having spent insignificant resources, it is possible to produce very high-quality greenhouses for any types of practiced garden plants in the shortest possible time.
Direct greenhouse assembly processes spend very little time. The main concern is the selection and preparation of places for their construction and the collection of necessary materials.
A polyethylene sleeve with a width of 140 cm is taken as a coating material.
A place is chosen for a mini-greenhouse, a peg and a half meter is driven into the ground. A circle with a diameter of 80 cm is drawn around the peg. Along the line of the circle, rods of 60 cm are inserted into the ground, 25 cm long, from each other. 4 stick a bar with a length of 120 cm stick along the line of the circle in equal segments. The rods are stuck with their tops up - they will spring, and the film will not collapse on their ends.
A piece of a “sleeve” 1.5 m long is cut off, straightened and put on a “fence of branches” with a stocking up to the ground. At the top, the film gathers around the central peg and is secured with wire or cord. Due to the rods, the film will stay in a stretched state, and the greenhouse will look like a wigwam.