As we know, All the plants in the garden and cottage area that we plant begin with seedlings. Almost all those who have a personal plot do not buy seedlings, but grow it from seeds. When they germinate, and they need to be planted in open ground, then the problems begin: then there is no place on the sunny side, then something will block it and many other factors. The author of this idea offers a wonderful solution to this problem, namely a home-made mobile greenhouse for seedlings on wheels, which can easily solve the problem of lack of sunlight. If the sun has gone, then this greenhouse can simply be rolled over to a sunny place and that’s it! the problem is solved!
You can also regulate the problem of excessive lighting so as not to burn seedlings.
To make such a greenhouse you will need:
A wooden box (if one is not available, then you can easily put it together yourself), a glass sheet that will be the same size as the size of your box, large wood screws, four rubber washers, small wood screws, a plate, the thickness of your glass sheet , screws and four wheels.
First, take the available glass of the appropriate size. We collect a box under its dimensions. If you already have a box that is suitable in size, then simply unscrew the board from its bottom. Do not throw them away. Subsequently, they will be useful for assembling a mobile platform.
After the author made the frame according to the size of the glass (or vice versa), he took the rubber washers and screwed them along the edges of the frame on one side, since when airing the glass should be slightly inclined, so they will not be needed on the opposite side. On these rubber washers just glass will lay down.
Now take the bar, which is equal in thickness to the thickness of the glass. Saw off a couple of short plaques. Screw them to the edges of the frame with screws. Do not tighten one screw tightly, since the second bar should freely rotate along its axis.screw the rest tightly to the frame. These slats serve as fasteners for glass, so that during transportation it does not move and there is no danger that it will move and crack.
As a result, you should get such a structure here:
For safety, I would make two such mounts on each side. For the convenience of storage in a horizontal state, and you never know what.
That's how the frame will be installed on the street. After installation, boxes with plants are transferred into it and the greenhouse is covered with glass.
If you had a box and you took it apart, then the boards from the bottom can be used for a mobile platform. If you just assembled the frame, then we make a platform from the new material. There is nothing difficult. Just collect the boards and fasten them with cross bars.
Now that the author has prepared the platform, wheels need to be attached to it.
They are mounted on self-tapping screws.
As a result, you should get such a mobile platform on which you can load containers with seedlings and take them out to fresh air.
Of course, both the platform and the greenhouse itself can be assembled as a whole, but in this case you will have to transfer the remaining plants manually. Yes and not everywhere in the garden you can drive, but just go. Therefore, it would be better if the design remains separate. That's so interesting and necessary homemade I wanted to present to everyone!