» Country homemade »DIY watering system

DIY watering system

DIY watering system
Each summer resident knows very well from personal experience how it is not easy to water your summer cottage, how much effort and labor you need to put in to water the beds, how much water you need to drag for only watering.

And similar day after day.

Of course, it is especially difficult for people with a sore back, and for old pensioners, for whom a summer residence is very expensive, because the main products from the summer residence are, and not only for pensioners. Not the great incomes of our people, they force them to grow more vegetables on their land plots, and by the way it’s very good, because from their land the products are environmentally friendly and healthy, unlike those bought in the supermarket.

So, in order to facilitate watering at their summer cottage, people came up with watering systems such as drip, sprinkler, and soil. The author gives us an example of schemes for how watering occurs according to each of the above watering principles.





For a small garden with beds, the drip type of watering is best suited. The principle of this type is not so complicated as it might seem. The settled warm water is supplied through a hose, and is distributed among the capillaries, which are led out to each plant separately, and slow drop watering occurs. That's essentially the complexity of this device, drip irrigation in its area do it yourself.

And so now we will consider in detail what was needed for the drip irrigation device at its site and how it produced these works.

Materials: watering hose, hose for drip irrigation, tees, plugs.
Instruments: knife, pliers, spade.

And so, first of all, the author conducts water from a tap, in which the settled water is supplied from a barrel, which the author deliberately set 1.5 m above ground level to create optimal pressure for watering plants in the beds. I dug a trench, and laid a water hose in it.




Then he brought out a hose near the beds, and installed a tee.

The hose extends along all beds and installed a plug at the end of the hose.

Further, a thin hose for drip irrigation is already distributed directly to each bed.

At the ends, makes a stub so as not to buy in the store once again, just bends it, and tightens, and pins a peg to the ground.

Makes distribution to each bush by connecting tees, and bends.

And so, under each spine.

Next, I connected the entire system in a similar way



Made a trial test of health. Everything works perfectly, and the author will no longer have to water the beds dragging watering cans with water, and not straining his back just turn the faucet, and the water will rush along the irrigation hose to the plants for their drip irrigation.
0
0
0

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
6 comments
Vania
Quote: Valery
So as not to buy specials. hoses for drip irrigation, you can use a simple HDPE pipe. I somehow worked in FH. We organized a capillary on hectares ....
Holes are pierced in a PND with a red-hot needle and it is laid along a number of plants, about ten centimeters from the stems. It is covered with black spanbond from above, because it will not work to break holes strictly in the plane - they will be in a spiral.
I have it in the greenhouse right now. And in the beds with greens - the water I have the same PNDshkami underground divorced. A piece of a “holey” pipe along the length of the bed, with one end plugged, is connected by a hose to the nearest water outlet and fits where necessary. At the same time I use Chinese timers from Ali-Express, which I described. After planting, once spread out, connected everything - and until the end of the season you don’t remember watering ....

So the price is the same. Only a pain in the neck with a pnd is bigger and then this pndshku not stuck pryshku not apply, rezhite the Chinese hose dir until tired
So as not to buy specials. hoses for drip irrigation, you can use a simple HDPE pipe. I somehow worked in FH. We organized a capillary on hectares ....
Holes are pierced in a PND with a red-hot needle and it is laid along a number of plants, about ten centimeters from the stems. It is covered with black spanbond from above, because it will not work to break holes strictly in the plane - they will be in a spiral.
I have it in the greenhouse right now. And in the beds with greens - the water I have the same PNDshkami underground divorced. A piece of a “holey” pipe along the length of the bed, with one end plugged, is connected by a hose to the nearest water outlet and fits where necessary. At the same time I use Chinese timers from Ali-Express, which I described. After planting, once spread out, connected everything - and until the end of the season you don’t remember watering ....
Let's try, just the season begins)))
Well, do it like in the photo, beds. And not a box.
Yes, not everyone sometimes has good land. We have imported land at the cottage, and the cottages themselves are located on the site of the former Brick Factory. So we have little huts for a bayonet shovel, and then sand and brick chips).
: winked: Have you seen what kind of land there is? Here; to you and the beds about which I wrote above. Here; they are refined (and we stupidly repeat). Here; here I will believe that the harvest is many times larger. But why do we need this? About the camera, I liked it. : wink:

We advise you to read:

Hand it for the smartphone ...