Hello dear the inhabitants of our site. I present to your attention an interesting idea of a barbecue grill, which can be collected in your yard with minimal investment!
To begin with, the author of this post took an old bottle.
Marked out a place for drank parts of the cylinder, the future cover for the product. I cut off the upper part of the barbecue barbecue using a grinder and cut off all the excess parts.
From the upper part, which he cut from the workpiece, we get such a lid.
Further, the author cleans the places of cuts with a grinder.
The next stage of assembly is the fitting of the part, on which firewood will subsequently be laid, with subsequent use. In my opinion, this part should not be rigidly fixed, giving the opportunity to remove it from the barbecue, if the need arises.
Next, we take the upper cut-off part and set it on the basis of the barbecue. We install small spacers around the edges to form a gap. After we attach the hinges, the door will open without any effort and detail, the barbecue and the door will not rub together. Fasten the loop.
We drill holes for the hinges and fasten the parts together using bolts.
Next, we fasten the side along the edges of the door. It contributes to a more tight adjacency to the barbecue.
The result is this:
Further. At the bottom of the brazier, we drill holes so that ash spills out from there and does not accumulate in the brazier.
We fix the handles. We also install them using bolts.
Behind the hinged door makes a crossbar. It is necessary so that the door itself, when something is being prepared on the barbecue, is not opened and folded down to the very bottom, but in such a way that it keeps its weight. This bar supports it. It’s convenient enough, because you don’t have to go around the barbecue every time, if necessary, close the door. Just reach out and close. Easy and convenient!
It looks like a ready-made barbecue. We clean the surface so that when painting the coating is even and the paint does not exfoliate.
Now we make a stand for him.The author decided to make a stand in several shelves. For manufacturing, a square tube and a sheet of tin were needed.
Here is such a stand.
Since holes have been drilled in the bottom of the barbecue so that the ash does not accumulate in the barbecue itself, the upper shelf must be made from a sheet of tin. Even if burning coals fall, the shelf will not deteriorate. It should have a bent side up. So, the combustion waste will not fall directly under your feet and fly around the territory, creating a fire hazardous environment. The remaining shelves and a small table in front of the barbecue are made of wooden bars that are sanded and coated with varnish or stain.
Here is what the author of this topic ultimately did. Convenient, modern and quite necessary thing in the household!
