» Fixtures »Homemade ceiling shower

Homemade Ceiling Shower


Nowadays, people pay very much attention to personal hygiene, which mankind just did not come up with to maintain physical cleanliness. In urban conditions, a shower or bath is of utmost necessity, because the city is very gassed, dusty, polluted, a huge number of bacteria on all kinds of surfaces that we touch every day.

Here is a small example from the story; in Europe during the Middle Ages, such a luxury as a hot water bath was considered the height of perfection, and only high state officials could take it. But over time, and the development of mankind, this luxury has turned into a simple routine, without which a person cannot imagine his ordinary life. To the extent of progress and development in everyday life, a person comes up with new fixtures for ablution). All kinds of tightly entered our life: a jacuzzi, showers, sharko, and other delights of bathrooms.

But all these charms of life sometimes cost not a lot of money, but what about a simple person who does not have enough money to purchase the latest bathroom fixtures. The answer is as always simple, you need to think with your head and look for a rational solution to the current problem.

The author decided to apply a rationalization decision to change the structure of the soul, and turn an ordinary shower into a pendant on the ceiling with six shower heads for processing the surface of a person from all sides at once. If you carefully understand everything, everything is extremely simple, and very affordable for a simple person, since the components can not be expensively purchased in the building market. I bought plastic water pipes, watering cans for showers, fittings, and assembled from them a structure representing a system of simultaneous operation of six watering cans at once. Imagine, you do not need to spin in front of the watering can, or remove it from the holder, and water yourself in hard-to-reach places, just stand still and the shower will water you from all sides.

And so now let's look in detail how the author performed the work of assembling an unusual soul, and what he needed for this.

Materials: 16 mm plastic water pipes, fittings, watering cans of 6 pieces, chain, hooks, flexible hose, stainless steel clamps.
Instruments: hacksaw or pipe-cut, impact drill, knife.

And so first gives us a photo report on the materials and tools that he purchased.








Then he makes a measurement of the amount of water flowing out of the water pipe, which goes to supply the shower, for a period of time equal to 1 minute.




Then she cuts plastic pipes in size.



It also recommends cleaning pipes from advertising signs using sandpaper. And then the plumber starts assembling the structure.




Then he proceeds to paint his invention, recommends the use of paint for plastic coatings, and with high moisture resistance. Before painting, the joints were wrapped with molar tape to prevent paint from getting on them.


And then it tightens shower heads to the joints.

Then it installs the mounts in the form of hooks, and subsequently on which the hanging shower will be attached to chains.



The next step secures the chain to the structure, and to the hook system on the ceiling.

Then he places a flexible hose in a bucket of hot water to make it soft, easily put it on the pipe, and insert the adapter into it without difficulty.




At the joints, secured with a stainless steel clamp.


Then I installed everything and connected it.

And the final touch, puts in place the curtain.

That's all, he did an excellent job with the task, and now has an unusual shower in his bathroom, which all owners of fancy bathrooms will envy.
10
10
10

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
5 comments
: winked: I don’t know, I don’t know, so many watering cans? What pressure is needed for hydromassage? And if the pressure drops a little, we get six watering cans. And what kind of hydromassage is it from the top, at an acute angle?
And the hose with the "stainless" clamps is really nightmarish ... It would be better if I took a finished one in a metal braid, or I looked for a white one from a washing machine ... Or even better, I would bring water with polypropylene and that’s it ... And then, a very interesting solution - put the hose on the thread and tighten with a hose clamp ....: wink:

By the way, the author. These are not "plastic pipes." It is polypropylene.
We can get an analogue of a hydromassage shower cabin ... Remote, really enough ... For example, I always use only the upper "watering can" in the shower cabin - I need a shower to wash!)))). But the wife constantly also includes a hydromassage panel, which beats with jets from the side .... Apparently, something similar was also pursued here ... For "relaxation", so sket ...: feel:
: winked: Sorry, but what's the point of such an idea? What should we get as a result? What did they strive for?
An interesting move, but why clamps? It would be possible to use an ordinary shower hose, or a hose purchased with a thread would be more aesthetically pleasing. Moreover, connections for PVC pipes with an adapter are sold.
But, the idea itself is great)

We advise you to read:

Hand it for the smartphone ...