How to put the wiper fan nozzles on a VAZ 2114 with your own hands

On cars of the VAZ 2108/2109/21099 model, as well as the VAZ 21013/2114/2115, standard wiper nozzles with one channel are installed as standard. Their problem is that they have little efficiency, that is, the liquid is sprayed with a single jet and does not spread well on the glass surface. This problem has already been solved on cars of the tenth series and above. Here nozzles are already installed with several channels, that is, fan ones. This allows you to spray liquid on the glass more efficiently, which allows you to faster and better clean the glass.

According to the author, such a problem can be solved literally in 15 minutes, it is enough to have nozzles and have minimal technical skills.

Materials and tools:
- two nozzles (fan);
- two self-tapping screws (for attaching nozzles);
- a screwdriver with a bat and a drill.


The process of installing nozzles:

Step one. We remove standard nozzles from the car
In the photo you can see how the factory nozzles of the glass cleaner look. They must be removed; for this, hoses must be carefully disconnected from the nozzles. As for the hoses, they need to be pulled out.

Step Two Install new nozzles
The author installs the fan nozzles on the windshield deflector. To do this, drill a hole in the deflector. Next, the nozzle is mounted on an ordinary screw. In total, two nozzles are used to understand where to install them, the windshield must be divided into two parts, and then each part divided again in half.

Step Three Connecting and checking nozzles
Now it remains to connect the nozzles and check. To do this, connect the fluid hoses to the nozzles. That's all, after that you can go to the salon and check how the nozzles work.

If it so happens that the liquid splashes at the wrong angle, this can be easily adjusted by placing the right number of washers under the nozzles.