Tuning optics on the example of a VAZ 2110 car

This article will discuss options for how to tune the optics of a car. This will make auto more unique and brighter. There are a lot of ways how you can tune the optics, if everything is done quickly and simply, then you can purchase an ready-made tuning kit called ProSport. If there is a desire to do something absolutely unique and inimitable, then everything needs to be done here do it yourself.

Materials and tools for tuning optics:
- flat screwdriver;
- stationery knife;
- glue;
- hair dryer;
- LEDs (if additional illumination will be used;
- other tool.


Optics tuning process:

Step one. Change color
The most popular refinement of headlights is a change in their color. There are several ways to change the color of headlights. Perhaps the most humane is gluing headlights with a colored film. If necessary, it can be removed and the headlights will become the same as before. Also, it is not difficult to do, unlike other methods. For such a tuning it is not even necessary to remove the headlights, the film can be glued on top of them, it will also protect the headlights from external factors (scratches, chips ...)

If the headlight will change thoroughly, then you can not do without disassembly. To remove the headlight glass, you need a hair dryer, with it you need to heat up the sealant that holds the glass. Next, a flat screwdriver is taken and with it the glass is gently pulled. Along with this, you need to cut the sealant, for this purpose a clerical knife is used.

Now you can start painting. If the substrates in the headlight are silver, then it is not necessary to clean them, you can paint directly on top. All you need to apply several layers of paint, making the necessary intervals between them. For painting, use heat-resistant aerosol enamel.

Step Two Highlight headlight lenses
The meaning of tuning is to highlight the lens of the headlight, highlighting it with a certain color. Such illumination is done by installing an LED behind the lens. It is not recommended to use red LEDs for tuning, since red color in the headlights is prohibited, this can cause an accident, and a fine for such tuning can be considerable.

Step Three LED headlight installation
You can also install LED LED strips in the headlights, thereby making the car more like popular foreign cars. In order to install the tape, you need to remove the headlight glass. Next, the tape is glued to the headlamp on superglue. The tape is connected to the side lights.How to specifically position the tape in the headlight, here everyone decides for himself.

If it was decided to use the ProSport kit for work, it is important to note that these optics may become cloudy over time. To return the headlights to their original clarity, you will need to polish the glass.