Immediately at the beginning of the article it is worth mentioning that smoking harms health! For those who do not care about this warning and who live today, receiving everything from life, one can offer to assemble such a hookah out of any unnecessary computer hardware. Spare parts from the printer, computer power supply and other elements will be used.
Materials and tools for homemade:
- a drum from the printer;
- cooler grille from a computer power supply;
- ordinary water hose;
- coupling with nut;
- a can of coffee (to create a flask).
Of the tools you will need: nippers, scissors, drill, screwdrivers, hacksaw, pliers, glue, drill.
Getting to the assembly of a hookah:
Step one. Hookah Mine
First you will need to get all the necessary details. As a donor, the author used an HP1010 model printer, elements may differ in other printers. You will also need a cooler grill, it can be easily removed by taking the cooler apart. In some power supplies, the grill is an integral part of the housing, in which case it will need to be cut out.
First you need to take the drum and then drill through the center gears that are on it. Next, a tube from a magnetic brush is inserted into these here. To protect the gears from overheating, the housing is inserted from the capacitor. Such a capacitor can also be found in the power supply. As a result, the assembled shaft must be airtight.
Step Two Making a hookah flask
As a flask, the author applied a can of coffee. In the lid, it is tedious to make a hole in diameter such as a coupling. Also in the cover you need to make two more holes, one for the shaft, and the other for the valve. Well, now you can insert the shaft.
Step Three Valve for hookah
The valve is needed in order to vent excess pressure in the flask. Otherwise, water may enter the mine. In addition, the valve is required for purging. The valve works in such a way that with a slight tightening it passes a little air into the flask. When strong, it completely closes, while air begins to flow only through the shaft.
Valve is made do it yourself. It is made of two bolts with large hats, a piece of a helium pen, and also needs a body. A metal tube is suitable for the manufacture of the case, a television plug is an entirely acceptable option. On one side, the valve is screwed into the cap of the flask, and on the other hand, two recesses must be made so that air can pass.
Step Four Chilim
To make chillim, you will need a cooler grill, as well as a smaller diameter tube for the cartridge.
To collect the hookah on the fruit, a fruit holder was made from the cooler lattice. Thanks to this grate, the fruit does not slide down when put on the tube, it rests on the grate.
On the bottom side of the pipe you need to make cuts, and sharpen its edge. With this fixtures in fruit, you can make neat holes, and only then put on the end of the tube with the grill.
That's all, now the hookah is ready and you can begin to test. According to the author, the hookah smokes perfectly. Its advantage can be considered that you can make a hookah on fruit, and the device is also equipped with a valve. On the video you can see the tests of such a hookah.