A hanger in the form of a large paper clip is of course very unusual, even to some extent exclusive, because not many can boast such a hanger.
This idea occurred to our author spontaneously, and therefore is so unusual.
Taking a regular paper clip, taking it off the dimensions, scaled and bent to the given sizes, it turned out an amazing hanger for outerwear.
Well, now let's look at the work that the author took on the photo, but before that, look at the list of tools and materials that were needed to work.
Materials
1) aluminum wire rod
2) fasteners
3) paper clip
4) wood screws
Instruments
1) vernier caliper
2) felt-tip pen
3) screwdriver
4) can
First of all, the author takes dimensions from a regular paper clip.
Then the whole thing goes through a 1:24 scaling step, and the marker is applied to the places of future bends with a felt-tip pen.
The author makes the marking on the workpiece itself according to the given dimensions.
And after all the processes, he proceeds to bending the paper clip.
That's what he did.
Before making the hanger, the master decided from the beginning to use it as a paper clip.
Then he made such a man.
And sat on the table of his workplace.
After all, I decided to finish what I started, made a bend with the help of 2 plates and clamps.
Such a bend turned out, he will serve as a hanger.
Further, with the help of fasteners and a screwdriver, installation is carried out.
And so it is bolted to the wall, ready for use. This hanger fits very well into the working interior of this room.
Unusual hanger, nothing to say.