Reliable do-it-yourself bike trailer for leisure travel

Every cyclist sooner or later raises the question of acquiring a bicycle trailer, because it is a very necessary and useful device.
Going on a trip on his iron horse, it is quite difficult to have without a trailer. On the road and on vacation, you will need many things, items.

You can either buy this trolley in a store, it’s also reasonable to do it yourself if your hands grow from the right place.
Homemade trailer It will cost inexpensively in comparison with the factory models, if you also collect from existing parts and details.
For example, if you have a pair of wheels, then the floor is done.

The author of this trailer did not spend absolutely a penny, all that was needed was found in his the garage.

What exactly was required for assembly? We read the article further and everything will become clear to you, in the future you will be able to assemble the same trailer for your bike.

Materials
1) wheels 2 pcs
2) professional square tube
3) metal plate
4) plywood
5) plastic box
6) fasteners
7) bolts
8) nuts

Instruments
1) grinder
2) welding machine
3) drilling machine
4) hammer
5) set of wrenches
6) screwdriver
7) pliers
8) clamps
9) ruler
10) sandpaper
11) brush

And so the first thing the author prepares the brackets for mounting the axles of the wheels.
Drills holes in designated places.
Drilled, that's what happened.
Then makes cuts in the plates.
And he begins to deal directly with the frame of the future trailer.
A square is made.
Side holders are welded to it.
This action is carried out on both sides naturally.
Then the author tries on wheels.
The skeleton is reinforced by two more cross members.
Mount to bike will implement the hitch.Done this way.
The device itself.
The connection is detachable.
Next, an MDF sheet is taken for the manufacture of the platform.
After marking, the excess is cut off.
A hole is drilled under the fasteners.
The contour is tried on and outlined.
A deepening is being done.
And only then it twists.
What came of it.
A saddle is made on the trunk of the bike.

Here it is installed.
The author also installed a plastic box where the hardware is stored.
Well, in fact, the whole trailer is ready and you can go on a trip to the local surroundings, or go fishing with an overnight stay.
Nothing complicated, you have carefully studied everything and you can start creating your own trailer, become independent from shops and do more things do it yourself.