The original shelf from boards and bottles was made by the author homemade.
Tools and materials
Glass bottles;
Boards;
Brackets;
Drill;
Jigsaw.
Having taken the board, the author cut off six pieces of equal length along the length of the jigsaw. Then the workpieces were sanded and varnished. The shelf consists of three identical sections. One section consists of two boards, four bottles and two brackets. To assemble the section, the author drills holes in the board so that the board dresses on the neck of the bottle.
In the middle, on the lower and upper boards, the bracket hooks are screwed.
Puts bottles on the bottom board. The bottom of the bottle is fixed with glue. A bottle with holes is placed on top of the bottle. Pulls boards with a bracket.
By the same principle, collects the remaining two sections. The sections are placed on top of each other by aligning the necks of the bottles and the previously made recesses in the board.
