Which of us, in childhood, did not dream of having a bow. But some, and having matured, fulfill their childhood dreams. Here is the author homemade decided to make a bow from cycling wheels.
Tools and materials.
Bicycle wheel assembly;
Saw for metal;
Scissors;
File;
Loops with a loop.
First, the author parses the wheel. Takes off the tire, camera. Disassembles the knitting needles. Parses the wheel hub. Then cuts the wheel rim in half. A file smooths out all sharp edges. Inserts bolts in extreme holes. The nuts are screwed onto the ends of the bolts. After five holes, two more bolts are installed.
The author cut the bowstring out of the bicycle chamber. Cutting two strips of fifty centimeters, folded them in half. I tied a strip of rubber on the bends. In the middle, folded strips, tied them with a piece of rubber.
I cut two rings from the camera. He put one ring in the middle of the rim, the other in the middle of the bowstring.
He passed the ends of the bowstring through the rings of the bolt and tied them to the extreme rings.
The wheel hub, using a rubber ring, is fixed to the rim. Makes a sight. Bends the end of the spoke by ninety degrees. Having passed the spoke through two landing holes on the hub, it bends again.
The onion is ready. The tension of the bowstring occurs with the help of a rubber ring, dressed on it.
