Do-it-yourself tandoor in the country

Today, the device is gaining more and more popularity in summer cottages of all kinds of stoves, barbecues, barbecue, smokehouses and other things. But in this article we will talk about an unusual furnace for our country, this idea came to us from distant Asia.

Like all normal stoves, tandoor also consumes wood for its functioning. What is of interest is the bizarre form, which for us certainly seems unusual, but what good things you can cook in this wonderful stove, you will lick your fingers.

The tandoor is located vertically, unlike our stoves, and all the heat rushes naturally upwards where either a cauldron is placed, and delicious cakes and a lot of things are baked, which will take a lot of time to transfer.

In this case, the furnace is set below zero, that is, in the recess. This arrangement has the best traction and does not take up space at all, because it can be hidden under the floorboards.

So what should go directly to the work itself, but first you should study the list of materials and tools used.

Materials
1) brick
2) pipe
3) clay
4) sand
5) cauldron
6) newspaper
7) reinforcing mesh

Instruments
1) trowel
2) mallet
3) hammer
4) shovel
5) mesh
6) solution tank
7) plank

And so, the first thing the author dug up a depression and began to lay the foundation for the future furnace.
The brick is laid out in a circle on the end.
As you can see, a pipe for traction is laid.
One end is above the surface of the earth, the second is laid directly at the base.
After the author carried out the work, the tandoor was on par with the ground level.
Then the master prepared the cauldron he will need to create a neck.
A clay solution was also prepared.
From the beginning, the cauldron is taken and turned over.
And then the fun begins, the surface is pasted over with newspaper and clay.
And so layer by layer using a reinforcing mesh.
Such a gate is being made.
Then the author takes a mold from the work surface.
Leaves to dry.
After complete drying, a fitting is performed.
Well, actually installing the neck in its rightful place.
The junction is thoroughly smeared with clay.
This is what results from the work done.
Now the author has his own tandoor in the country, where he can cook delicious oriental dishes.
And most importantly, everything is pretty simple and affordable for anyone.