This article will discuss how to make a dispenser for alcoholic beverages. The dispenser will become a decoration in the kitchen and will surprise your friends at the festive table.
Tools and materials:
-Tee;
Coupling;
-Crane;
-Flange;
- Two drives;
-Board;
-Bung;
-Sandpaper;
-Glue;
-Silicone;
- Stain;
-Minwax Polycrylic Finish (protective coating);
-Paint;
-Fasteners;
-Roulette;
-Drill;
-Crown;
-Grinder;
For dispenser, the author used pipes 3/4 inch. Coupling 3 \ 4 on 1 inch.
Step 1: Painting
First, the author painted all the metal parts. The paint was applied in several layers.
Step 2: Build
Before assembly, all threaded joints are coated with silicone. A long flange fastens to the flange. So that the liquid does not flow down, a plug is installed in the upper part of the drive. Then tightens a tee, a small squeegee and a coupling. On the side, in the tee, screw the tap. Covers everything with clear spray paint.
Step 3: Making the base
For the foundation, the author cut two planks measuring 15 * 30 * 2.5 cm. I cut a 10 cm hole in one board. I glued the boards together. After the glue has dried, I processed the stand with sandpaper. He rounded the edges with a grinder.
Covered the base with a stain in two layers. After drying, coated on top with a protective coating in three layers.
Step 4: Shut Down
Screwed the dispenser to the base. Now you can use the dispenser for its intended purpose.
