» Furniture » Tables and chairs »Hanging table

Hanging table

Hanging table

Despite the apparent simplicity, the hanging table made by the author has several advantages. When folded, it does not take up space, the ability to quickly dismantle and fasten in another place, ease of manufacture and accessibility of materials.

Tools and materials:
-A circular saw;
-Drill;
-Roulette;
-Gon;
-Pencil;
-Drill;
-Knife;
-Rasp;
- Joiner's glue;
-Sandpaper;
-Nippers;
- brush;
-Protective glasses;
-Plywood;
-Board;
- rake;
-Wire;
-Fasteners;
- Loops;
-2 carbine;
- Stain;
-Acrylic coating;



Step 1: Material Preparation
Using a circular saw, he cuts the blanks of the future table.





Lays out the parts in order.


Step 2: Frame
Assembles a frame.


Checks corners. Fixes with screws.




Makes a pen.



Step 3: Countertop
Gathers the middle of the countertop. Lays a square of plywood inside the frame. Screws mounting rails to plywood. The tabletop does not yet fix to the frame.





To the middle part adds side.

If all converge proceeds to the next step.
Step 4: Processing Table Parts
Covers wood with wood stain.








After drying the stain, covers all parts with acrylic.


Step 5: Assembling Countertops
Cuts, in the middle and side of the countertop, grooves under the hinges.








Tightens the hinges.





Step 6: Assembling the table
Screws the countertop to the frame.




Step 7: Wall Mount
Fastens the table frame to the wall.


Step 8: Gimbal
Fastens two hooks to the frame and countertop. A carabiner fastens to the frame hook. A cord is attached to the carabiner and hook of the countertop.








The table is ready. You can use it for its intended purpose.



9
10
9

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
Author
He had a 243 cm long rail. I cut two pieces of 89 cm and cut the remaining 63 cm in half. Therefore, 2 pieces of 89 and two of 31.5.
And why are the two slats supporting the hinged parts solid, and the third of two short pieces?

We advise you to read:

Hand it for the smartphone ...