» Fixtures » Instruments »PVC pipe clamp

PVC pipe clamp

PVC pipe clamp

Unusual clamps made of PVC pipe were invented and made by the author. The main feature of these clamps, in comparison with other similar ones, is that they can be used with one hand. Prior to this, the author made two more versions of clips. The most successful presented in this article.

Tools and materials:
-Saw;
-Drill;
-Drill;
-Vise;
- PVC pipe;
-Rod;

Step One: Cutting
Such a clamp can be made of PVC pipes of different diameters. In this case, the author used a 10 cm pipe. Cuts a ring 3 cm wide.

Clamps the ring in a vise and cuts it.

Step Two: Holes
Makes four holes. Two at a distance of 2.5 cm and two at a distance of 11.5 cm from the site of the cut.


Step Three: Clamp Assembly
For this clamp, two rods 18 cm long were used. The diameter of the rods is equal to the diameter of the holes. Inserts rods into holes. If the rods are not inserted tightly sits them on the glue.


The clamp is ready, now you can try it in work.

If you need a more powerful clamp then one more ring is added.

8
8
8

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...