Dear visitors of the site, in this article, you guessed it, technology will be presented for the production of riveted spinners for predatory fish: pike perch, pike, perch.
And so briefly about the lure made by the author, 2 types of metal were taken for its manufacture: brass and stainless steel, the desired shape was given to the blanks. After that, holes were drilled in the plates and after inserting the double hook, two parts of the spinner were riveted into a single whole. To do this, the wizard needed the following:
Materials1) brass sheet
2) stainless steel sheet
3) brass rivets
4) 2 pcs bolt
5) nut 2 pcs
6) double hook
7) cambric
8) crown
Instruments1) hacksaw
2) pliers
3) drill
4) emery
5) grinding wheel
6) hammer
7) vise
8) file
To create this spinner, the author took 2 metals of different colors such as brass and stainless steel, this trick is used directly to play the color of the spinner in the water column. The master uses an unusual way of creating lures for predatory fish by means of riveting two plates, as you know basically the lures are torn and soldered, but our author went a new revolutionary way, so let's see what he did and how he performed the work on creating its unique spinners.
First of all, the author naturally prepared the material.
On a stainless steel sheet, I made a marking according to the given sizes.
It does the same with a brass sheet.
Then, according to the obtained marking lines, he makes a sawing with a hacksaw for metal, and for greater convenience, clamps the workpiece in a vice, and quietly cuts this workpiece in size.
With a brass sheet, he naturally carries out similar actions, and this is what he got 2 plates of different metal.
Further, the author takes a double hook purchased in advance in the fishing department of the store.
Then he puts a hook on the plate in order to apply marking for subsequent drilling.
Drills holes at the designated points.
Previously, the author twisted both plates together, this is necessary directly for subsequent processing and shaping.
And so the master on the emery machine cultivates the resulting workpiece.
He does everything carefully and slowly, gives shape.
Here's what the master did previously.
The author tried to make the surface even and smooth.
After the action, it is necessary to disassemble the structure, unwinding the fastening elements.
Next, a small groove is pierced in the plates - this is necessary directly for better engraftment of the double hook itself, so that everything is smooth and without distortions.
After the preparation, all parts are riveted into a single unit.
The baubles are also given a curved shape, the author does this with a vise.
And one more thing, in the upper part of the spinner another hole is drilled under the winding ring.
Further, the author polishes on a special machine.
He does everything quite carefully, because the brighter the lure will play, the more likely the fisherman is that the predator will throw a lure and the catch will be taken :)
This is how the baubles look after processing on the machine.
Pay attention to what form the author gave to this product.
Well, actually the work on the production of riveted baubles has been completed.
The master makes a control measurement.
The indisputable advantages of making such a spinner is that you do not need to tin and solder, not everyone succeeds, someone cannot at all, and this technology allows you to easily make a spinner for winter fishing in a short period of time, and maybe not just one, and a few :) The author asks you not to meticulously evaluate his idea, because this is only an experimental option, and there are practically no analogues on the Internet.
This concludes my tale, I hope you enjoyed it :) Thank you for your attention! Come visit more often, so as not to miss the latest in the world of homemade products.
