The cost of this spoon-bait is understandably cheap, and this will save a fisherman’s budget well. The material used is 5 kopecks bimetallic in release no later than 1996, because after this year coins began to be produced on the basis of steel, and steel, as you know, rusts.
And so it should be considered what the author needed to make this spinner.
Materials
1) 5 kopecks in 1996
2) tee
3) crown
4) steel habits
Instruments
1) metal scissors
2) file
3) pliers
4) screwdriver
As mentioned above, this lure is designed to catch pike in the winter, which means that the author will make the leash necessarily steel, because the predator easily bites the fishing line with its teeth. The body itself, the master will make from an ordinary five-penny coin, which has a good white metallic luster, and the predatory fish loves it very much :) A blank will be given a diamond-shaped shape, and bends on both sides of the center will be made to improve dynamic properties.
First of all, the author takes the coin itself and gives it a diamond shape, using scissors for metal.And so this workpiece is obtained.Edges the edges very carefully with a file.Holes are made on both edges of the spinner for the subsequent installation of a tee and a winding ring.
The author bends the edges from the center with pliers giving the spinner the necessary shape, this will improve its oscillatory actions when playing.Well, then the master inserts a tee and a winding ring to which the steel habits are attached to the holes made in advance, be sure to pay attention to the steel one because a pike can eat a regular fishing line and leave with your bait, which is not good :) You can cook several dozen one sitting :) and provide yourself with a reserve for the entire period of winter fishing.
This concludes my tale, I hope you enjoyed it :) Thank you for your attention! Come visit more often, do not miss interesting news in the world of homemade products.