This article will discuss how to make a small electric winch from available materials.
Tools Materials:
-The wiper motor complete with gear;
-Metal strip;
-Metal curly tube;
- Power button without commit;
-Insulating tape;
-2 bolts of 8 cm with nuts;
-Wire;
- Terminals;
- Power supply 12 V / 1.5 A;
Cutting machine;
-Drill;
-Soldering iron;
-Epoxy adhesive;
-Keys;
-Calipers;
-Nippers;
Step One: Making a Pen
Cuts a workpiece for a handle of the desired length from the tube. Wraps the edge of the handle with electrical tape and pastes it with soft material.
Step Two: Install the handle
Cleans the junction of the handle and engine. Apply epoxy glue to the handle. Presses the engine to the handle and wraps them with electrical tape.
Step Three: Winding Fork
Cut two metal plates of the same length.
Folds the plates together and fastens them, along the edges, with bolts. A hole is drilled in the center of the plate, along the diameter of the gearbox shaft. Secures the winding fork to the shaft.
Fourth step: connecting the electric motor
Trim the plug on the power supply and strip the ends of the wire. In the handle, drills a hole for the power button. Sets the button. Connects the wire from the power supply to the button terminal. A piece of wire connects to the second terminal of the button.
Extends the wire coming from the power supply.
Installs terminals on the ends of the wires. Connects them to the motor terminals.
It remains to connect the power supply to the network and you can use the electric winch.
A little from myself. For those who will make such a winch, I would advise fixing the handle to the engine in another way. For example, two, at the edges, clamps.