The author simply ingeniously invented folding holders for spinning on a transom (motor mount) on a boat.
The ease of manufacture is simply amazing.
The author took a plastic sewer pipe with a diameter of 50 mm. 450 mm long.
Two plastic holders for the same pipes and two ordinary window, card loops.
To begin with, the author fastened the hinges with plastic holders using a screw and nut.
The hinges are needed so that they can be folded when assembling the boat, so as not to damage the boat.
Then he fixed them to the transom with screws.
In working position.
And in the assembled position.
In the tubes, the author cut the slots for the legs of the coils.
Insert the tubes into the holders and go ahead for the fish.
