Necessary materials:
- Plywood 5 mm.
- Polypropylene pipe
- Fishing reel
- Roulette
- Red cloth
- Self-tapping screws
- bar
Step 1: First, we need to saw (with an electric jigsaw) a circle of plywood with a diameter of 200 mm. Then in it exactly in the center we drill a hole with a diameter of 20 mm. When we have done everything, it is necessary to clean the blank well with sandpaper so that the fishing line is not damaged during fishing.
Step 2: Next, take a small bar measuring 40x40 mm. and make three holes in it. One in the center with a diameter of 20 mm. (for the tube), and two holes on the sides (for screws). And fasten our blank as shown in the photo.
Step 3: Next, cut a small piece from the polypropylene pipe. And with the help of screws we fasten a coil to it.
Step 4: Then we cut a piece of 25-30 cm long from the metal ruler. At one end we make a series of small holes, this is necessary in order to fix the fabric with threads so that it does not fall from a piece of the ruler. And to this end we sew a small piece of red cloth (This will be a check box).
Step 5: Next, we fix the checkbox to our zergilza, using a self-tapping screw. Plywood needs to be varnished so that it does not exfoliate from moisture over time.
We equip our zerglovy, and you can go fishing! To all fishermen - NO TAIL, NOT SCALES.
The way the winter zergelika flag works:
[media = // www.youtube.com/watch?v=nBbXJWh0P88]