And so let's get started.
We will need:
1. Teaspoon
2. Clockwork rings
3. Tee (preferably with red feathers).
Instruments:
1. A screwdriver with a 3 mm drill ..
2. A grinder or hacksaw for metal.
First, take a spoon and saw off the handle itself. Then trim the edges. I did all this with a grinder.
We take a segment from a spoon and core under two holes, retreating from the edges of 2-3 mm.
Next, we start drilling.
That's what we should end up with. In the holes made earlier, we start the rings. It is advisable to take smaller rings.
To one of the rings we start a tee with feathers, feathers are needed in order to attract predatory fish (zander, perch, pike, etc.).
The lure itself can be painted in red or black paint, I didn’t have such paints, I painted it with pink varnish (for nails), I can still cover it with transparent varnish in 2-3 layers, but this should be done after painting. The coloring should preferably be in small circles, or paint half of the spoon with black paint, and the second red (this attracts perch very well).