Slag block making machine

Today, the building materials market offers a huge selection of building materials, for any choice and budget.

Technology stepped far forward, they touched and building materials. The manufacturer uses all kinds of chemical compounds to speed up the production process, hence the abundance.

But you can do the building material yourself, ask how? See further and learn everything, make your own machine for the production of blocks, build yourself a house, garage, a bath, but whatever you want.

Materials
1. sheet metal 3 mm
2. water pipe
3. emery
4. wire
5. circuit breaker
6. professional square tube
7. fittings
8. spring

Instruments
1. Bulgarian
2. welding machine
3. hammer
4. emery
5. set of wrenches
6. vernier caliper
7. ruler

The process of creating a machine for the production of cinder block.
And so you should start with what is a cinder block? What it is made of and what its characteristics are.

The production of cinder block began in Soviet times, when for the construction of houses, garages, factories, barracks, livestock farms and so on. they needed an inexpensive and easy-to-manufacture material, which was the cinder block.

The name itself speaks for itself what this unit is made of, and it is made from coal slag, which remains after the boiler furnaces in the coal boiler room. As you understand, the material is free, it’s simply a production waste that can be converted into personal gain for private construction or business.
The production of cinder block is the simplest among building materials of this type and size, because it does not require additional heat treatment, unlike brick.

The technology is as follows: slag is taken, mixed with sand and cement, water is added, kneaded ATTENTION! (semi-dry mortar) in a proportion of 1 part cement 3 parts sand and 5 parts slag, as well as 0.5 water of the total mass of cement. The main thing here is not to overdo it with water, according to the author, the solution should turn out (semi-dry), you can determine this as follows, take a little solution in your hand and squeeze it, it should not release water and not crumble, but throw it on the ground and crumble.

After preparing the correct solution, it should be laid in the mold, turn on the vibrator, press on the lid and turning off the vibrator motor to lift the mold, the block will dry on the ground, and the mold will move on for the next molding.
To begin with, you should consider the drawings of the machine.

And so now let's look at how the author made his machine for the production of cinder block. The first step is to cut blanks from a sheet of metal 3 mm, to work with a grinder should be careful.Then, from the obtained blanks, an iron box is welded.For the convenience of filling the solution into the matrix, the author makes a special apron for the box, from the same metal 3 mm.It is welded onto the box.On the sides on both sides of the eyes are welded.After the base is ready, the author proceeds to create punches that will be responsible for the cavities in the blocks, for this a metal water pipe was taken and cut into 3 equal parts.A cut is made in the pipes in the upper part for their subsequent fastening, and 3 cuts are made in the lower part, then crimped and boiled, thereby creating a cone, it is necessary for better shape removal. Further the form is put on a bed.The locking mechanism is made.And also a press cover.A lever mechanism is created and a vibrator made of emery is placed, a switch is also connected so that the vibrator can be turned on and off And now the machine is ready, you can start working and make your own blocks.This concludes the article. But you can also watch the video on the manufacture of the machine and consolidate the material covered. Happy viewing.
Thanks for attention! Come visit often, do not miss the latest in the world homemade!