Hello dear friends !!!
I wanted to introduce you to another kind of home-made stand for a smartphone or tablet. Today, almost every one of us has two such devices, but when watching a video or a movie, sometimes we don’t want to hold the devices in our hands or our hands just get tired. You can easily get rid of this problem by designing a stand for our favorite appliances. So, let's begin!
For homemade I found it useful:
- plastic card,
- electrical tape
- scissors
- pliers
- lighter,
- a knife
- ruler
- a felt-tip pen or marker,
- sandpaper,
- Super glue.
First, draw a line in the middle of the card like this:
Next, heat the knife with a lighter so that it is easy to cut the card. Then with a hot knife we cut the plastic card along the line marked earlier.
They cut it. Equate with sandpaper, grind the cut.
After being polished, we mark here such marks on both parts:
This is how I got it:
Again we heat the knife with a lighter, cut along the marked lines and grind the cut with emery cloth.
Put the mark again, only at the other end of the plate.
With pliers, bend the plate along this line, as shown in the photo.
Now we glue these areas together with super-glue.
In order to keep the glued areas much stronger, I shook all this with electrical tape.
So that the screen does not scratch the plastic, I did the following:
That's it, my homemade stand for smartphone or tablet is ready.
Personally, my smartphone holds firmly and reliably.
That's all.
Good luck to all!!!
Bye everyone !!!