Today, people are more than ever drawn to land and suburban life, urban overpopulation is paying off, a person by nature wants peace of mind and unity with nature. You can reunite with nature and relax outside the city at your summer cottage.
But what if you recently bought a bare and empty piece of land, the first thing you need to do is build a small house so that you can change clothes, eat and lie down to rest after work in the garden.
And so let's look at one option presented by the author, how he built his
country house.
Materials1. blocks 200x400x4200
2. 30 mm board
3. beam 40x40
4. insulation
5. lining
6. soft tiles
7. roofing material
8. insulation
Instruments1. hacksaw
2. hammer
3. jigsaw
4. screwdriver
5. shovel
6. ax
7. roulette
8.benzo-generator (if there is no electricity)
The process of building a country house do it yourself.A country house or a change house serves the owners until they have built a large house for permanent residence, or when only temporary housing is required without permanent residence, to store equipment, change clothes, take shelter from the weather-catchers and take an emergency in case of a car breakdown, and buses no longer go.
The most popular today are the easy-to-erect frame-panel houses, trimmed with a lining or board. With the right approach and layout, it is quite possible to build a very comfortable house, even for living. The berth can be placed on top, thereby freeing up a lot of space that can be used for your purposes.
For the convenience of climbing up should provide a ladder.
So placing the sleeping bag on top, you can freely put a small kitchenette and, if desired, a shower.
The most important thing in this matter, according to the author, is to choose the right layout.
And so, before the start of construction, the author cleared the land for development, as well as marked it up and proceeded to create the foundation, which he would make from 200x400x400 blocks. First, a recess is rummaged and filled with sand, spilled with water, rammed, then blocks are laid out.
On the obtained foundation, the bars are laid, the crate is made and sewn up with plywood. It is also necessary to lay a waterproofing layer in the form of roofing material.
Then, on the resulting surface, the author puts a layer of insulation, in the form of mineral wool.
Next, a frame of walls from a bar is prepared.
It is best to coat wood with impregnation, so it will last much longer.
After impregnation, the assembly of the frame begins.
Walls are sewn up with plywood sheets.
As soon as possible, the author proceeds to roofing, so that unexpected rain does not wet the walls of plywood.
The roof is simple gable.
Sheets of plywood are also sewn on top of the crate, this is necessary in order to then lay a soft roof.
The author begins work from the bottom and gradually rises. The tiles are nailed to the plywood with small and preferably galvanized cloves.
Then the windows are inserted.
And also the door.
Insulating material is sewn onto the walls over plywood.
And then sheathed with a board.
The house inside is insulated with mineral wool.
Also, another layer of insulation, and then gets off with lining.
The main work is done, the house turned out to be good, but as you can see in the photo
construction It took a long time, for obvious reasons, then there is no money, then there is catastrophically not enough time, I had to finish it already in the snow, so that to warm up the author installed a gas convector to heat the room.
This is how it looks with a cylinder connected.
You can also install a small stove and heat with wood.
A toilet room was also made.
And then the interior decoration.
There is already a lot of people here.
Here is such a wonderful little country house turned out by our author, which he is incredibly happy about. Now you can come to the cottage at any time of the year, relax and enjoy the beauties of nature.
This concludes the article. Thanks for attention! Come visit often, do not miss the latest in the world
homemade!
This article is for informational purposes only!
