Let's see the manufacturing process homemade in the video:
In this post I want to tell and show how to make the illusion of an endless mirror from a regular photo frame.
For assembly we need: ordinary photo frame, mirror, LED strip, better color, mirror film and a little tool.
To begin, we disassemble the photo frame and remove the glass from it.
Then you need to wipe the glass and the mirror well so that there are no traces on their surface; the better you clean the surface, the fewer traces will be visible in the final result.
Next, take a mirror film and cut off a little more glass sizes.
Wet the glass surface with the prepared solution of water and shampoo to avoid the ingress of dust and small parts between the glass and the film.
Then we glue the film to the glass and use a plastic card to level the surface of the film so that there are no bubbles. Then we cut the film along the edge of the glass.
Since my LED strip turned out to be very wide and greatly exceeded the borders of the frame, I decided to make small grooves around the entire inner perimeter of the photo frame so that the LED strip fit onto the glass.
Then we measure the LED strip to the size of the frame and insert it between the glass and the frame, there is a gap of 1 millimeter.
Then we insert the mirror and check our homemade work.
And as you can see, everything worked out for us.
Then it’s fashionable to finally glue the mirror to the frame, and to glue the back cover from the photo frame onto it.
Now that's all, a few movements and you can enjoy the beautiful illusion of an endless mirror, and due to the remote control and multi-colored LED strip, you can adjust the modes and colors to your liking.
And of course, the final stage is a heart for loved ones.