» Fixtures » To the photographer »Flash from a burnt charging station

Flash from a burnt charging station

Fixtures / To the photographer
Added 11 comments

A good flash for the phone comes from a burnt charging station. If the charging unit of the station burns, it can be converted to a flash for the phone.

To do this, you need a micro button from any electronic devices
And a powerful 5W GREE LED

We connect the batteries with the LED through the button.

Flash button on the side.

The radiator and resistance are not needed for it - it turns on for two seconds and during this time nothing can burn out.

Good lighting is the key to a good shot.
0
0
0
5
Added 11 comments

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
11 comments
+1
Reply To quote A complaint
Quote: Valery
But why ruin, if you can solder a little scarlet resistor
And even more correct - buy TP4056 (they have a “three rubles bag” from the Chinese) and repair the power bank.
+1
Reply To quote A complaint
Quote: Coudeyar
Chinese Zi KUI Ping made himself in the garage for me!

According to the technology "hammer-sledge hammer Bao-ju-dune" ???? boss
+2
Reply To quote A complaint
And how much did he burn this year? A couple of minutes? ... And from such two batteries it should burn for a couple of hours ....
... No, well, I don’t understand this ... Well, it’s clear that “for this purpose” it will last for a long time !! But why ruin, if you can solder a little scarlet resistor and extend the life of both of them by tens of times ???
Author 0
Reply To quote A complaint
not at 0.2 volts
Author -2
Reply To quote A complaint
Now my wife was frightened by a flash - I almost went blind .... Exactly a year has passed and the battery and diode are alive! Maybe the EGE is to blame?
+1
Reply To quote A complaint
Ivan means that it is spelled incorrectly: the first letter is not that .... He is a "Cree", not a "gris"))))))
0
Reply To quote A complaint
But the battery capacity is hooked decently ....
Author -1
Reply To quote A complaint
I can send you by mail - the diode has been working for a year now, but you need to pay mail -50 euro - write the address !!
Author -1
Reply To quote A complaint
+1
Reply To quote A complaint
The radiator and resistance are not needed for it - it turns on for two seconds and during this time nothing can burn out.


Resistance NEEDS !!!! The diode is not a load !!! The diode is a conductor !!! You ruin both the diode and the batteries !!!!
0
Reply To quote A complaint
What is this GREE LED? Something painfully rare.

DIY categories

We advise you to read:

Hand it for the smartphone ...