Dear visitors of the site In the presented material from the author, it will be shown in detail and described how
do it yourself make a bench. Its construction is quite simple and quite possible for everyone who wants to have a brand new little bench on their site. The master also presents all the necessary drawings and step-by-step photos, following which you will succeed.
And so, let's carefully consider all the stages of creating a bench, and also find out what the master needed.
Materials1. board
2. timber
3. nails
4. wood screws
5. stain
6. varnish
7. wood impregnation
8. wood glue
Instruments1. hacksaw
2. clamps
3. screwdriver
4. drill
5. corner
6. brush
7. roulette
The process of creating a bench with your own hands.And so, the first thing the author gives us is to get acquainted with the drawings of the future bench.
Further, according to the drawings, the master begins the assembly. First, the legs are made.
Then the master fastens the beam which will serve as the base of the back.
For convenience of screwing, the author uses clamps, which secures the workpiece.
For the convenience of tightening the screws, the author first drills a hole.
The screws are screwed in from the back, at an angle.
And now the bench is completely ready.
The author covered it with wood impregnation, then stain and varnish. It is also advisable to protect the bench legs from moisture coming from the ground - this can be done as follows: cover the lower parts of the legs with bitumen mastic, or glue the rubber gaskets with glue.
This concludes the article. Thanks for attention!
Come visit more often. Do not miss the latest in the world of homemade goods!
This article is for informational purposes only!