» Fixtures »Tool holder

Tool holder

Fixtures
Added 15 comments

Hello everybody. The tool holder can be made from a piece of plastic pipe by sawing it into pieces. I took a piece of pipe with a diameter of 32 mm.

One end of the pipe must be sawed at 45 degrees.

I took a piece of the board 1 meter and screwed these tubes with screws to the treated board.

Well, that's all you can lay out the tools so that they are always in sight. Before screwing the tubes to the board, you need to drill holes for the screw so that the tube does not crack.

it device can be hung in the garage or in a workshop in the country.
7
7
7
8
Added 15 comments

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
15 comments
Author 0
Reply To quote A complaint
Ivan, what's up? Show your design.
+1
Reply To quote A complaint
I take a piece of decorative plastic panel about 50 mm long over the entire width of the panel. There are holes in the end. I insert the entire "little thing" (screwdrivers, awl, files, tassels, etc.) into these holes. On the back, stiffer side I paste the same tubes. Can be mounted in any convenient way. The main thing is reliability. I’m already inserting a larger instrument, pliers, wire cutters, etc. into the tubes. I paste two metal strips with "ears" into the grooves of the panel. On them you can hang the panel in any convenient place. As a drawback, the front side faces the wall, but most importantly, it is compact, lightweight and quite reliable. She has been serving with me for two years.
0
Reply To quote A complaint
What does this have to do with it? I just expressed an idea of ​​how this might come in handy.
0
Reply To quote A complaint
Petka. He had to study well at school. "" "" "


And be sure to read the encyclopedia! And you won’t be able to distinguish the yeriplane from the Deribzancil !!!
aggressive
Author 0
Reply To quote A complaint
Quote: Valery
As for me - you can hang it over a small workbench to place an "operational tool". I mean, the one you are working on now. So as not to occupy a place on the table ... Sit, work ..

I do not force to store in it? The master is the master.
+2
Reply To quote A complaint
Quote: Coudeyar
Try it yourself ! On a plastic sled ride on a board?

"Vasily Ivanovich, you’re literate. Tell me why the wheels of the train are knocking on the rails?
Everything is very simple Petka.
Area of ​​a circle Square, The pi-number is constant, it does not depend on the radius of the wheel either, it remains a "square". And if you roll the "square" on the rails ...?
So he knocks, Petka. He had to study well at school. "" "" "
laugh1
0
Reply To quote A complaint
As for me - you can hang it over a small workbench to place an "operational tool". I mean, the one you are working on now. So that he didn’t take a place on the table ... You sit, work ... I got the right tool, used it, put it there, got another. If you sit, so that it is slightly above the level of the forehead.
And store in such .... Sorry, but I, for example, have lever units (pliers, round-nose pliers, pliers, wire cutters, long-nose pliers, round-nose pliers and others like them) of forty units, screwdrivers, only in sets, about 30. .. Everything hangs on the wall on long hooks, several units each. Screwdrivers - in a corner screwed to the wall with holes. Those in the sets are also hooked. And so the whole wall is ....
+1
Reply To quote A complaint
What is it for? Does plastic not slip, and because of this the pipes will not bend from a heavy tool? ))))
Author 0
Reply To quote A complaint
Try it yourself ! On a plastic sled ride on a board?
0
Reply To quote A complaint
There are much more compact methods: in cells on the wall plane (for example, behind a rail) or simply in a box divided into compartments (by the type of tool or by another principle).
+2
Reply To quote A complaint
Quote: Coudeyar
plastic and wood do not have SLIDES

What is it like?
Author 0
Reply To quote A complaint
Can be installed after 2 cm !!! where to place the tool ??
Author -1
Reply To quote A complaint
The fact is that plastic and wood do not have SLIDES!
0
Reply To quote A complaint
Very non-compact, even if the instrument is only a dozen units.
+1
Reply To quote A complaint
God forbid, stumble near such a shelf. The holders must be fastened more vertically. + Heavy tool, not sagging for a long time. Although the idea itself is not bad.

DIY categories

We advise you to read:

Hand it for the smartphone ...