I think that almost all laptop users faced a problem when their laptop starts to overheat, and when complex special applications and games work. Sometimes the temperature inside the device exceeds 100 degrees. With these values, the device itself can slow down, freeze, turn off, and malfunction. At the same time, the speed of worn microcircuits begins to increase and as a result, the laptop can completely turn off and not turn on at all, and repair in this case will be very expensive.
Laptops and modern devices begin to heat up - the reason for all this is the laws of physics, that is, when electric current passes through conductors, resistors, transistors, and so on, heat is generated and the more powerful the device, then it has more different elements that produce heat. But most of the heat is generated by the video card and processor. Of course, almost every modern laptop has its own cooling system, but they can be very hot. But in order that they do not overheat, you can yourself, do it yourself to make a stylish cooling system. Moreover, this homemade It will also be a stand for convenient use of your device. It is about this homemade product, about its manufacture that you will see in this article.
To make this homemade, the author needed:
Tools and devices:
1) A simple pencil,
2) Electric jigsaw,
3) Paints,
4) Electric drill,
5) Self-tapping screws.
Spare parts and materials:
1) Two computer coolers,
2) LED strip,
3) Power supply for 12 V,
4) Connecting wires,
5) Plywood,
6) Corners.
First of all, the author prepared the plywood, cut it to size and cleaned it, polished it. To prevent the laptop from sliding off the stand, on the front side, attached a wooden base to the edge. Then he painted an image on it.
Following the lines of the image with a jigsaw, the author cut holes. Then he sawed the legs for the stand and attached them to the base with the help of furniture corners and screws.
Repainted the stand to your color.
From the bottom of the stand, the author attached coolers that match the places where the laptop heats up most.
I also fixed the red LED strip so that it looks stylish and modern when working. He connected both coolers and LED strips to a 12 V power supply.
As a result, after trying, the author got such a beautiful cooling pad for a laptop.
And so it looks like a stand in the dark.
This is where I end the article. Thank you all for your attention! Good luck to everyone and bye!