» Forum » DIY ideas »Micro Drill Chuck Adapter

Micro Drill Chuck Adapter






Interesting homemade from the cartridge. The applied nozzles on the collector motors are relevant, but they have drawbacks !!! For different diameters of drills or other processing tools, you must change the collet! I propose to make an adapter for a 3-jaw chuck, from 0.5 to 6.5 mm. But there is one thing, you need access to a lathe or a familiar turner!

Add answer

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...