» From sites » Specialist »Stylish do-it-yourself stool

Stylish do-it-yourself stool

Stylish do-it-yourself stool

To all readers of a good time of day!
Today, the article will describe a method of manufacturing a stylish stool. The manufacturing process is very simple, everyone can cope with this work with a minimum of tools. The main advantages of such a stool will be the cost-effectiveness and durability of the structure, since simple and affordable materials will be used, applying which it will turn out ....... ..? And what happens, you can find out at the end of the article!

The author encloses a detailed description of the manufacturing process, to which a photo is attached for visual perception.

To make a stool we need:

Instruments :

- roulette;
- a pencil;
- cutting tool;

Materials:


- cement
- a wooden handle of 1.5 m, with a diameter of 30 mm;
- sand, water;
- a plastic bucket;
- paint.


Let's start making stools!
To get started, take a wooden handle, and cut it into three equal parts, 40 cm each, for this we use any available cutting tool.





Now we take cement, sand, water and a container in which we will mix the solution. We prepare the mixture in a plastic bucket, it will also serve as a mold for the seat, mix cement with sand for about 1/3, then add water, stir, try not to overdo it with water, the solution is not very liquid.





When you have achieved the desired result, we take three prepared legs, which we place in the solution about 3-4 cm deep. In order for the legs to fix well during hardening of the solution, I recommend screwing several self-tapping screws into the immersed wooden part. We expose the legs as shown in the photo. Leave the solution to harden for several days.



When the solution has completely dried and hardened, you can get the shape of the seat. We take the bucket and begin to move it by the walls, you can lightly hit the bottom of the bucket with your hand, then we take it by the legs and get the workpiece.



Next, we take sandpaper, with which we remove the sharp corners of the seat. Then polish the surface.



In order to give the stool additional originality, we paint its legs in the desired color, for this we use a brush, or we do it as shown in the photo, by immersion in paint.



Before painting, it is recommended to check the stool for skew, whether it stands even if there is skew, remove it, by cutting the longer part. If desired, install copper caps - lugs.



As a result of all the actions, we get such an original stool that will brighten up any interior.





The article is over, thank you all for your attention!
5.5
7.5
8.5

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
In addition to the choice of extremely dubious material for the seat, except for a gift to the enemy, there are also bloopers. Look at the legs: they are not cut in parallel with the plane of the seat. Well
Then polish the surface.
the copyist apparently knows the great technological secret of polishing concrete, but for some reason he did not share it with us.
And the "style" of the product, apparently, is in its extreme instability, which confirms the idea that this is done as a gift to the enemy. )))
Author, do not sit on this stool, there will be no children. Perhaps I’ll even keep silent about the need to reinforce this product, we think everything is fine.

We advise you to read:

Hand it for the smartphone ...