For the manufacture of the case itself, the master used hardwood, by definition (plum), this material has high strength and a beautiful noble texture, and most importantly, very affordable. For example, the author obtained the necessary piece of wood in his country house, during the autumn pruning of old and dry plum branches.
The flash card used its old one, which had long been lying idle for nothing, the volume of 2 gigabytes. Of course, brass and copper were used as stylization and decor. And so, let's take a closer look at what the author specifically needed?
Materials
1. wood (plum)
2. brass sheet thickness 0.5
3. copper wire
4. brass washer
5. rivet
6. brass plate
7. 2GB flash drive
8. LED
9. wire
10. cold welding
11. super glue
12. wax
13. stain
14. pasta GOI
Instruments
1. hacksaw
2. Planer
3. drill
4. chisel
5. hammer
6. sandpaper
7. burner
8. velvet
9. vise
10. file
11. burner
The process of creating a pirate unsinkable flash card do it yourself.
Before starting work, the master drew a small drawing, as they say, "Measure seven times, cut once." The author always adheres to this principle and calculates all the subtleties and nuances, so that in the subsequent work there would be no unpleasant moments. As mentioned above, for the manufacture of the case of flashcards, plum wood was used in advance prepared at the summer cottage when pruning fruit trees. A rectangle was made and a cavity was machined in it for installing the card itself, that's what happened.The author carried out the work with the help of small homemade chisels, which he specially made for such a miniature work.On the surface of the hull was a relief resembling the skin of a ship, using a burner.With the help of a drill, file and tap, I made bolts with a ring head for installing the chain.
As a result, we got such a chain with bolts.The author made a porthole out of a brass washer, having previously drilled holes around the entire circumference, and riveted brass rivets to the bottom, it turned out very cool.For attaching to a wooden case. the master made a mount with brass studs.Soldered wires and LED.Using a drill and file, he turns brass rivets.Rivet holes are drilled in a brass plate.Here is a riveted plate.After that, the end parts of the flashcard case are made.The author glues brass parts using cold welding.Metal parts are thoroughly ground and polished.The case is exposed to stain, but the author faced a small problem here, the stain practically did not soak into hard wood, and when dried, a thin crust formed. To solve this problem, it was decided to cover the stain again and rub the surface with wax, and then heat the resulting layer with a burner and the wax will be absorbed into the wood with the stain.Here is the burner the author worked on.Then everything is assembled and glued together in a single design and this is what happens.The plastic cap is also glued to the wooden case.And now the finished flash drive is connected.The porthole lights up in green, it looks simply gorgeous. This is such a wonderful and unique flash drive that our author obtained, the main thing is uniqueness, because today everything is filled with consumer goods and it became difficult to stand out) It’s also very appreciated manual labor, which means you guys are on the right track to your success, and maybe financial independence ) Do more creativity, self-development and create!
This concludes the article. Thank you very much for your attention!
Come visit often, do not miss the latest in the world of homemade goods!
This article is for informational purposes only.