Cold smoked smokehouse "Smokehouse"

Dear friends and site visitors, from the material given by the master, you will familiarize yourself with the process of creating a cold smoked smokehouse, namely a smoking house. This direction in the manufacture of smokehouses is quite new today, but we will analyze everything on the shelves and understand how everything works, the principle of work, which material is best used for its manufacture.

With the advent of small smoke generators on sale, there was also a need to make smoke chambers for them, basically this is a simple box with a door, a tray, a thermometer and hooks inside for hanging the product. But our author went a little further and made a beautiful and neat smoking house.

Smokehouse Overview:



Important!It is best to use hardwood to create a camera so that there is no foreign smell and resin.

And so, let's look at what exactly the author will need to build a house?

Materials
1. board 25-30 mm (hardwood)
2. galvanized roof nails
3. timber
4. screws
5. soft tile
6. smoke generator
7. aluminum sheet
8. steel wire
9. thermometer
10. loops
11. water stain
12. nails

Instruments
1. jigsaw
2. hacksaw
3. drill
4. screwdriver
5. hammer
6. ruler
7. pencil
8. corner
9. brush
10. stationery knife
11. scissors for metal

The process of creating a smokehouse do it yourself.

And so, it was mentioned above that it is best to use hardwood wood for the manufacture of a smoking chamber, because softwood will exude tar spirit and, accordingly, the resin itself with increasing temperature inside the chamber, the temperature itself is certainly small from 18 to 25 degrees but yet..

First of all, the master collects the frame of the house from the timber, twists everything with screws.The resulting frame should be sheathed with a board, preferably with a groove or lining. The roof of the house is also finished with a board close to each other, because the inner part of the chamber must be airtight and not have gaps and holes in the skin.A doorway was made in the front part of the house and the door itself was hung.The author covers the roof with soft tiles, which does not burden the house and gives it a noble and interesting look. The tile begins to be attached from the bottom up with the help of galvanized small studs.The master covered the outside of the smokehouse with a water-based stain, it is also possible to burn it with a burner or blowtorch, which is more appropriate. In no case is it advisable to coat the surface with chemical-based varnishes, because when heated they will evaporate harmful substances that can negatively affect your health, so it is better not to risk using chemistry.And then the author installs the smoke generator purchased in the store, drilled a hole for supplying a pipe with smoke.He fixed all the components on the back wall of the smoking house.That's actually how it looks.This smoke generator, by the way, can be made independently, but we will talk about this in the next article, go visit and do not miss updates on the site.

As you can see, there is nothing particularly complicated in the construction of this house, all materials and components are in the public domain, you already have an example, be sure to bookmark it so as not to lose it.

With the help of this smokehouse you can smoke a variety of products, and most importantly, they will come out 10 times cheaper than store ones.

This concludes the article. Thank you very much for your attention!
Come visit often, do not miss the latest in the world of homemade goods!

This article is for informational purposes only!