For his long-standing undertaking, the master used old Soviet-made wristwatches, from which the dial was removed and the insides were bared, namely the mechanism itself is the skeleton, watches of this kind are quite fashionable today.
The author made the lighter as usual from noble non-ferrous metal: copper, brass. A strip was cut out of sheet brass and soldered into a ring; it is a body. Walls made of glass and glued to epoxy glue. Each detail is unique and made exclusively by hand, which to this day has a high price, both among masters and among connoisseurs of unique things.
And so, let's look at what exactly the author needed to create a lighter-watch? And also we will consider in detail the whole process in stages.
Materials
1. watches
2. glass
3. brass sheet
4. copper pipe
5. sealant
6. epoxy adhesive
7. copper sheet
8. copper bar
9. cotton wool
10. wick
11. silicon
12. seat
13. copper wire
14. nipple
Instruments
1. burner
2. file
3. drill
4. file
5. pliers
6. hacksaw
7. ammonia bath
8. vernier caliper
9. screwdriver
10. scissors for metal
11. file
12. marker
13. mini grinder
14. hammer
15. glass cutter
16. brush
The process of creating a watch lighter do it yourself.
And so, first of all, the author proceeds to the analysis of the watch and the extraction of the mechanism itself, removes the native dial and exposes the mechanism, that is, creates a skeleton from an old Soviet watch.Using epoxy glue, the master glues the star on the dial and then covers the surface with the same glue. The result was a certain symbol of the Communist era that had gone into oblivion.The watch case is made of sheet copper, namely, a strip of the required size is cut out, bent into a ring and soldered.A copper wire stop is soldered inside.On top of the case is a braided braid pigtail, as well as a hole drilled under the crown of the winding mechanism.I cut glass with a glass cutter and pasted it on the seat using epoxy glue.I inserted a mechanism.Here the watch itself is already in place and at work)
Further, the author makes a case for the lighter itself, also cuts a strip of brass and bends it into a ring, then solders it.2 rings were made of copper and brass, after which they were inserted into one another and soldered.An image in the form of an ear is applied.Trying on the watch case.Something like that)Inside the case of the lighter from the watch will be divided glass.The snap ring is soldered.Making a medium cotton wool tube and chair.Solder the cap from the nipple.A tube.Chair.Polished and polished.Soldering.Assembly and soldering of the insides of the body.Decorating elements are also soldered from the outside.Stopper for outside glass.Soldered.That's actually what happened.Decorating element in the form of a sickle and a hammer.Soldered.Everything superfluous is removed and cut out.The legendary inscription "proletarians of all countries unite. USSR."Cork screw and other small things.Soldering an element.Decor or as is customary to say among the masters (body kit)Assembly of all prepared parts in a single design.Campaign in an ammonia bath.That's the beauty)After everything is carefully polished.
And voila)By tradition, among the masters, control photographing of the finished product was carried out.
This concludes the article. Thank you very much for your attention!
Come visit often, do not miss the latest in the world of homemade goods!
This article is for informational purposes only!