Dear site visitors, from the master class presented by the author, you will learn how to make a unique transparent gasoline lighter
do it yourself. As a reservoir, the master used a used antibiotic vial (penicillin), which remained with the author from time immemorial. In Soviet times, such bubbles were abundant, as they say, "Not everyone will understand, but many will remember." And all the other parts are made of noble non-ferrous metals such as copper and brass.
The lighter device is simple: reservoir, cotton tube, wick, chair, flint, cap and chain.
And so, let's take a closer look at what the author will need to specifically build a lighter? And also the whole process is step by step.
Materials1. glass vial (penicillin)
2. brass sheet and copper
3. copper wire
4. wick
5. cotton wool
6. a wheel from a lighter (cricket)
7. flint
8. thread from crane axle boxes
9. brass tube
10. chain
Instruments1. drill
2. file
3. pliers
4. glass cutter
5. sandpaper
6. vernier caliper
7. velvet
8. burner, brazing alloy and pic
9. GOI paste
10. ammonia bath
The process of creating a transparent do-it-yourself gasoline lighter.The author set himself the task of making a unique and amazing lighter, glass is not so often used as a material for the lighter reservoir, in view of its low reliability, but the master made an improvement in the form of a brass band and the product became practical and reliable.
And so, first of all, the bubble itself is prepared directly, namely, the upper part of the neck is cut off with the help of a glass cutter - this is necessary in order to glue the brass parts of the lighter itself onto this place.
The head of the flask is made by the master of thread from the crane axle boxes, soldered to solder.
It also prepares a brass tube and a few more elements.
The part is machined with a drill.
Trial fitting.
Soldered a brass tube.
Create the top.
Soldered.
Smaller details.
All assembled in one design.
Used a bike cap.
Wrapped in thread.
Parts before assembly.
Soldered.
Wheel author used cricket from a lighter.
Collects.
Makes a chain mount.
Polished.
Chain.
Cap.
Accessories before assembly.
The chain and cap are connected.
Trial assembly and fitting.
Making a bandage for a glass tank.
Soldered like this.
Artificial patination in an ammonia bath.
Polishing after the bathhouse)
A rubber gasket from the camera of the bus is put on the tube.
The rubber gasket was glued to the gasket former.
Assembled.
The wick was also twisted and copper wire was woven into the middle, so that the wick would not frizz and keep its shape.
That's actually what happens, the upper part is unscrewed and you can refuel gasoline, and the tube itself is stuffed with cotton wool and fed with gasoline directly from the tank.
And according to the tradition established among the masters, the author made several control photos of the finished product.
Such an interesting and unique lighter was obtained by our author, which he actually wanted. The main thing in our time is uniqueness, because people constantly need to surprise something) So, guys who are familiar with this material, you are on the right track to your success. Engage more in creativity, develop your talent, create!
This concludes my article. Thank you very much for your attention!
Come visit often, do not miss the latest in the world of homemade goods!
This article is for informational purposes only!
