» Electronics »Heavy duty mini stun gun

Heavy duty mini stun gun

Heavy duty mini stun gun

Good day, today I would like to share another with you homemade, namely the stun gun. Today I will show how to make a mini stun gun. The word mini does not mean that it will turn out weak. According to the author of this homemade product: it will turn out to be super powerful at 800,000V, very compact and lightweight, they can defend themselves from ill-wishers or scare away dogs.

For a stun gun we need:
- Rechargeable batteries format 18650 2 pcs.
- Connector for 18650 battery 2 pcs.
- Two high voltage converters
- Button
- Adapters for sockets (as in the picture) 2 pcs.
- terma glue


Assembly of a heavy duty mini stun gun.
1) First, take two high-voltage converters and glue them together using a glue term, as shown in the photo below

2) Then we take two connectors for our batteries and also glue them together, as shown in the photo.

3) Next, connect the minus from the connector to the minus from the converter, also connect the minus of another connector to the minus of another converter.

4) Now we glue the connector and the module together

5) Then we connect the plus from the connector with the plus of the converter, and also connect the plus of another connector with the plus of another converter, through the button.

6) Now we take the adapter and disassemble it, connect one contact to one contact from the converter, and connect the other contact of the adapter to another converter. And we do the same with another adapter. We fix:


7) And insert our batteries into a heavy duty mini stun gun.

The heavy duty mini stun gun is ready !!!

Conclusion:
This stun gun can scare not only dogs, but also people passing by you. It turned out so loud that it simply cannot be conveyed in words. The video version of the assembly of this heavy duty mini stun gun can be seen below. Hope this article has been helpful to you.
[media = https: //www.youtube.com/watch? v = iNlYE913se8]
10
6.3
8.8

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
Quote: MNS1961
Everything is so much "snotty" that I have no words,

The homemade product is good, but not finalized. You need to take a piece of pipe from plastic, saw it along and lubricate it with soap, put silicone in it and it on this structure. After drying, remove it and this is no longer a “snot”.
Everything is so much “snotty” that I have no words to express my negative attitude to such “homemade products”.
I understand that this is an advertisement for goods sold on Ali Express. They, of course, nevermind, but for beginners I do not advise collecting such a gadget.

We advise you to read:

Hand it for the smartphone ...