» Construction » Electrician »Installing a warm electric skirting board with your own hands

DIY warm skirting installation

DIY warm skirting installation
Dear visitors of the site, from the material presented by the author, you will tell what a warm electric baseboard is and how it should be installed correctly in your apartment or country house.

This type of space heating system has appeared on the market relatively recently and is still not well known to anyone, but is slowly gaining popularity. A warm baseboard has several advantages over batteries and radiators, because it is compactly located in the lower part near the floor (it is the baseboard) What does this give?

Firstly, it takes up little space and can be placed furniture in any part of the room, there will be nothing to interfere.

Secondly, the heat is distributed evenly, first the wall warms up, and then it begins to give off heat.

Thirdly, heat flows do not raise dust in the apartment, which is favorable for allergy sufferers.

Also, this system has a temperature regulator, that is, you can add or decrease if it's hot. You can install it yourself, for which, let's get acquainted with step-by-step photographs and video material.

What exactly will be required to install a warm baseboard?

Materials

1. warm electric skirting board
2. heat reflecting film
3. heat-insulating film
4. screws
5. aluminum brackets
6. temperature controller
7. plastic wedges
8. heat shrink sleeve
9. plastic box
10 ten

Instruments
1. punch
2. drill
3. screwdriver
4. pliers
5. building hair dryer
6. knife
7. screwdriver
8. nippers
9. roulette
10. set of wrenches

Step-by-step photo instructions for installing a warm electric floor do it yourself.
The first step is to familiarize yourself with the schemes and the principle of operation, the connection sequence.



Installing the bottom aluminum rail.


Thermal insulation tape is glued to the wall.
Excess is cut off with a knife.
The height should be about 12 cm.
The second guide and aluminum clips are fastened respectively.








Assembly of the baseboard radiator and insertion of a heating element into the tubes.




Connection.



The junction is insulated with a heat-shrink sleeve or a regular electrical tape.
Then it is closed with a plastic box.
A heat-reflecting tape is glued to the inside of the baseboard.
Going plinth facing.




The thermostat is connected.
Heat distribution scheme.
It is also recommended that you watch the video directly from professionals.
As you can see, it is quite possible to install a warm electric skirting board yourself, which will save your money for the family budget. Instructions are provided for you, so go for it friends!

This concludes the article. Thank you all for your attention!
Come visit often and do not miss the latest in the world of homemade goods!
0
0
0

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
photo instructions for installing a warm electric floor
So, what, floor or baseboard?
from the material presented by the author you tellwhat is a warm electric skirting board
Eh, do you like to insert phrases whose meanings you don’t know.)) To make it "prettier"? )))

We advise you to read:

Hand it for the smartphone ...