Dear site visitors, from the master class proposed by the author, you will learn how to independently make a simple wooden chair.
The main goal of the master was to make a simple chair made of inexpensive wood, and most importantly, people without carpentry education and experience could repeat and get homemade
the furniture.
Today it has become quite fashionable to make tables and chairs on your own - this saves the family budget, and we also get essentially unique furniture and even handmade furniture.
The author used poplar wood as a source material, lends itself well to processing and is just perfect for a beginner carpenter.
The chair is assembled according to the principle of a thorn-groove, the master drills the grooves on a drilling machine and gets a chisel, the tenon is cut out with a hacksaw and brought up with a chisel.
And so, let's look at what exactly is needed to create a chair?
Materials1. board 25-30 mm (poplar)
2. wood glue
Instruments1. drilling machine
2. chisel
3. hammer
4. brush
5. stationary band saw
6. sandpaper
7. ruler
8. pencil
Step-by-step instructions for making a simple wooden chair do it yourself.Such a responsible matter as the creation of any furniture of course begins with a drawing and a sketch, which the author himself did at first.
For some details, thicker wood will be required and therefore the master makes the veneer, simply takes the board, greases it with wood glue and covers it with a second board from above, tightens it with clamps, leaving it in this position until the glue dries (at least 24 hours)
From the resulting laminate, the author makes blanks for the legs of the chair, previously draws a contour on the wood with a pencil.
Then it cuts along the intended contour using a stationary band saw. We also make grooves, drilling with a drill and getting a chisel.
Next, the master makes a spike.
The master makes the back of the chair as it should be of a curved shape, namely, he takes a plank and dissolves it in two so that there are 2 thin planks, then it is coated with wood glue and placed in a special wooden matrix, clamped with clamps and held in this position for 1-2 days so that the adhesive firmly adheres to the workpieces and they take the desired curved shape.
On the back obtained after molding, thorns are cut on both sides.
The seat will also be made of poplar wood, its author will make it type-setting, namely, it will make a groove and a spike in the boards, coat it with wood glue and assemble it into a single shield, tighten it with clamps.
Then all the workpieces are assembled in a single design.
That's the way the author made a simple and not expensive chair, it is quite possible to repeat in conditions
home workshop. The master made this chair with the expectation that people would like his master class and he will help them to get budget furniture.
As you can see there is nothing complicated here, step-by-step instructions and a photo you have, so we take and do. Go for it friends!
This concludes the article. Thank you all for your attention!
Come visit often and do not miss the latest in the world of homemade goods!
