So I decided to make myself similar fun. Let it be, especially since no one has ever done such a design.
We will need:
- old RAM;
- bearing;
- a pen drill;
- soldering iron.
RAM from some old computer.
We solder the microcircuits in the center, we will not need them.
We drill a bearing hole in the center. I have it 16 mm, the nearest drill turned out to be 12 mm. Drilled and drank files. Pre-twisting the RAM straps with screws. So they move less during processing.
Bearing from an old fan. Mine in kerosene. Dry and grease. I have teflon grease for a bicycle chain. It does not attract dirt.
The last step is to insert the bearing into the hole and hammer it carefully with a hammer.
We fix nuts on screws with super glue.
Here's a spinner. Now we can calm our nerves and excite others.
A link to the video instruction is attached.