DIY summer cottage trailer

Dear visitors of the site, from the material presented by the author, you will learn how to make a full-fledged automobile trailer cottage.

To create this trailer, the author used a ready-made aluminum platform with a working platform of 2000x4500; later, the dimensions were slightly changed 2200x4850. As the main material for creating the frame of the van cottages the master used a wooden rail 30x30 and 40x40 mm, birch plywood 6 mm, insulation in the form of polystyrene and mineral wool. R-14 wheels, springs, interior decoration: floor linoleum, plywood walls, gas water heater, gas-electric refrigerator, gas stove, LED lights are installed as lighting, there is also a kitchen table, a sink with a mixer, a tank for technical and drinking water, shower, sofa bed for relaxation.

Having such a cool trailer motorist lovers of travel can safely go on a long journey, on the road tired of a long stay at the wheel, you can turn off the road and stop the car near the road on some lawn or near the forest and relax, take a shower, eat and sleep, and then you can again sits behind the wheel while continuing to move to destination)

And so let's look at what exactly the author will need to build a summer cottage trailer?

Materials

1. aluminum trailer with a working platform of 2400х4500 mm
2. rail 30x30 and 40x40 (larch)
3. 6 mm birch plywood
4. R-14 wheels
5. aluminum sheet
6. self-tapping screws, bolts, nuts, washers, engraver
7. foam
8. mineral wool
9. polyurethane varnish, glue and sealant
10. led downlights
11. wires
13. door
14. window leaves
15. hatches
16. gas cooker, fridge, water heater
17. shower
18. and much more)

Instruments

1. jigsaw
2. drill
3. screwdriver
4. Bulgarian
5. set of wrenches
6. screwdriver
7. pliers
8. roulette
9. clamps
10. marker
11. corner
12. laser level

The process of assembling a car trailer "cottage" do it yourself.

So, first of all, the author takes an already finished aluminum platform with hubs and wheels, a tow bar and prepares a platform where he uses a larch rail soaked with an antiseptic against mold and rot, as well as 6 mm birch plywood.The floor is covered with linoleum.Next, the author begins to assemble the frame.After which the author proceeds to wall cladding with 6 mm birch plywood, as well as warming the inner space with foam and mineral wool.Interior walls, technological holes are made for hatches and windows.Also laying wiring, water supply, installation of a shower cabin and a water heater.Exterior decoration of trailer walls with aluminum sheet, installation of doors, window leaves, hatches, lighting fixtures, parking lights, brake lights, etc.
Interior decoration, installation of a refrigerator, gas stove, kitchen sink with mixer, water heater, etc.
Here is such a wonderful car trailer "cottage" turned out by our author, it took him about 9 months to build it, you know the work is difficult and very painstaking, the interior decoration took a lot of time, but the result is "Above all praises" According to the master, almost 400 thousand rubles were spent on the construction and materials, but the sale will cover all expenses with interest, and even with a good profit.
Can be used as an idea for a small business.

That's all. Thank you all for your attention!
Come visit often and do not miss the latest in the world of homemade goods!