Tricycle bike with chainsaw engine

Dear visitors of the site, from the material presented by the author you will learn how to independently make a tricycle mini-bike with an engine from the Ural chainsaw while having a minimum of funds, so let's go)

This tricycle mini-bike is the brainchild of one very good person and his name is Gaynetdin Bulatov from the city of Pyt-Yakh, you can just Gennady. The author made a tricycle specifically for his beloved grandchildren, Gennady has three of them)

The engine from the Ural chainsaw serves as the heart of the mini-bike. According to the author, he was lying unowned in the garagebecause he uses modern saws. Such an engine is well suited for a mini-moped and there is enough power to ride a child.

The frame is welded from a half-inch water pipe, wheels from a garden car, axles from there, a small drive sprocket from D-6, driven by a large one from a bicycle, the chain is also bicycle. Throttle and brake cables mounted on bicycle steering wheel. The rear axle is mounted through bearings at three points and is driven by the transmission of torque from the engine through a chain drive from small to large sprocket.

The wings are also homemade and made of metal from an iron barrel. Under the seat there is a small glove compartment where you can store and transport wrenches and a starter from a chainsaw.

So, let's look at what exactly the author needed to build a tricycle mini-bike?

Materials

1. engine from the Ural chainsaw
2. wheels from a garden car
3. bearings 3 pcs
4. asterisk from D-6
5. bike chain
6. half inch pipe
7. cable 2 pcs
8. bicycle wheel
9. 2-wheel rear axle
10. paint
11. big bike sprocket
12. foam
13. leatherette
14. plywood (for seating)
15. bolts, nuts, washers, engraver

Instruments

1. welding machine
2. Bulgarian (angle grinder)
3. drill
4. set of wrenches
5. screwdriver
6. roulette
7. airbrush
8. marker
9. hammer
10. corner

The step-by-step process of assembling a mini-bike with an engine from the Ural chainsaw
do it yourself.

As mentioned above, Gaynetdin created this mini-bike for his grandchildren in order to instill in them a love of motorcycles from a young age, a three-wheeled moped is very convenient in terms of stability, like a bicycle in principle, and a child quickly gets used to riding such a bike. Of course, children love their grandfather very much for his invention and enjoy riding in the courtyard of the house (naturally under the supervision of adults)

To start the assembly, the author purchased 3 wheels from a garden car at a reasonable price. Then he made the rear axle and prepared the bearings.Further fitting and trial assembly.
A sick asterisk from a bicycle is installed on the rear axle.The leading asterisk costs from D-6.
After that, the frame of a mini-moped was welded and the engine from the Ural chainsaw was installed.In order to reduce the noise of the exhaust pipe, an additional silencer was made from a pipe with 3 partitions inside, which contributed to a decrease in noise.The seat is made of plywood and foam trimmed with leather substitute, attached to the frame on the hinges, and under it is the trunk, where you can put the tool and the starter.Installed a gas tank, connected a gas line.Torque is provided by the chain drive.The rear axle is attached to the frame through bearings at three points.Throttle and brake cables are mounted on the steering wheel. The fork of the bike is also homemade.Asterisk from D-6. Here's a cool bikeWe also recommend watching a video of pokatushek on a mini-bike

The creator of the tricycle mini-bike Gainettin Bulatov from the city of Pyt-Yakh.

As you can see, in order to make your children and grandchildren happy, it’s not necessary to buy expensive imported toys that he will play, break and throw away, but such a bike will bring happiness and joy to a little boy and respect among peers and not only that) Well done Gaynettdin. Skillful fingers

That's all. Thank you all for your attention!
Come visit often and do not miss the latest in the world of homemade goods!