Mini - MT-2 tractor by Alexey Bobrov

Dear site visitors, in this material you will be presented with the assembly process of the MT-2 mini-tractor. Tractor author and designer: Alexey Bobrov from the city of Desnogorsk.

This mini-tractor Alexey assembled from spare parts, components and assemblies from Russian equipment, there are even elements from army equipment. The author has welded a frame from a metal corner and a professional pipe of rectangular section, according to his own drawings.

In the beginning, the master installed the D-300 engine, then replaced it with an imported “Lifan” 6 l / s because the magneto was on the Russian engine, and it was rather capricious during operation. The tractor has a belt clutch on pulleys of 80-20 mm.

The mini-tractor transmission consists entirely of units from the VAZ classic, a box, a bridge, a universal joint, a twin gearbox from the VAZ and URAL. Alexei shortened the bridge and the track width is 700 mm. Wheels are mounted from an army cart. The steering gear is borrowed from a classic VAZ.
The hinge plate is three-point, the lift is carried out using a lever.

In addition to the tractor, the following were made: a combined cultivator, a plow, a fan-operated potato digger, and a double-handed plow.

Thanks to his tractor, Alexey conducts his private economy, plows and cultivates a rather large garden, and he also made a solid tractor trailer which carries 1 ton of various cargo. In general, a mini-tractor is an indispensable assistant in the private sector and on land.

Materials

1. engines "Lifan" and earlier D-300
2 shortened VAZ bridge
3. corner
4. professional pipe
5. steering gear from the classics
6. VAZ box
7. wheels from an army cart
8. paint
9. seat
10. hitch

Instruments

1. welding machine
2. Bulgarian (angle grinder)
3. drill
4. hammer
5. set of wrenches
6. screwdriver
7. pliers
8. roulette
9. marker
10. emery

Step-by-step assembly instructions for the MT-2 mini-tractor do it yourself.

And so, at first the author made a frame, or rather, welded from a metal corner and a professional pipe of rectangular cross section.First, the Domestic D-300 engine was installed on the frame, and then it was replaced by the imported Lifan 6 l / s. in view of the fact that on the 3rd hundredth stood a capricious magneto.Also put a shortened rear axle from the VAZ, a track of 700 mm.Wheels from an army cart.Torque is transmitted from the box due to the cardan shortened shaft to the gearbox, and from the gearbox to the bridge.Assembled all the nodes and assemblies based on the prepared frame.After that, the mini-tractor was painted.
In addition to the mini-tractor, Alexey made an additional plow, a combined cultivator, a fan-operated potato digger, as well as a trailer capable of carrying 1 ton of cargo, or maybe more. We also recommend watching a video where the author tells in detail and shows the components and assemblies of his tractor, very interesting.



As well as 1 ton shipping on a mini tractor, Alexey’s son is driving



Here is such a cool mini-tractor turned out. Author and designer: Alexey Bobrov from the city of Desnogorsk. The master has been doing home-made work for a long time, and it all started with the creation of a home-made walk-behind tractor, but as they say, “It's a completely different story,” which we will talk about in our next article

That's all. Thank you all for your attention!
Come visit often and do not miss the latest in the world of homemade goods!