Good day to all. Today we learn how the author made a tool for pulling nails from a tree (according to the author, this tool can be used to pull a nail even if it does not have a hat). For this homemade the author took the steering rack, as it is a durable metal that can be hardened and released.
On a piece of plain paper, the author made an outline of the instrument, it will consist of two parts. Detail number one the author shaded.
Detail number two left clean.
First, the author set about manufacturing part number two. He took the steering rack from the car.
and sawed it along with the help of angle grinders.
Then he heated it and gave it the desired shape.
The author cut off the excess from the direct part, leaving not a large part.
Then he heated this workpiece and flattened it a little.
Like this.
Then he cut off the excess.
Then he took a piece of pipe and grabbed it to the flat part
He did this so that the part could be machined on a lathe.
I inserted the workpiece into the turning and worked the edges.
Then he squeezed the part in a vice and removed everything unnecessary first with a grinder,
and then file.
Then he made a slot on the part (part one will enter this slot)
Then, using a drilling machine and file, the author made a through hole a little oval.
Then he tipped on the side of the part,
and drilled.
Here is such a detail from the author.
For the next part, the author needed a steel strip that would go into the hole of the previous part. The author used the old key for this.
Cutting off his edges.
then on it he drew such a fang
and cut it out.
Next made a hole.
Well, the author has both details ready.
After checking how they fit together, the author started making pens,
for her he took a half-inch piece of pipe and drank
I put a part from a steel strip into this cut and scalded everything.
And in the end, the author tempered both details.
The author’s entire tool is ready to work, as you can see in the video, the tool does its job perfectly.
Homemade video: