Quick-mounted fence for drying fruits and vegetables

Dear visitors of the site, from the material presented by the author, you will learn how to make quick-release fences for drying vegetables and fruits yourself.

All summer residents and gardeners are well aware that with the advent of autumn, it is a hot time to harvest the grown crop from the beds and garden, but before sending vegetables and fruits to the cellar or underground for long-term storage, they should first be dried and sorted. Of course, you can also dry it on the plot by simply sprinkling the crop on the grass and letting it lie in the sun, blowing in with the breeze, but in the autumn it often rains heavily and it is not always possible to dry vegetables and fruits on the street. For this reason, the author mainly dries out the crop in his workshop, spreads plastic film on the floor and makes the sides of the boards. After drying, it sorts and sends to the cellar for long-term storage.

For more convenient placement of vegetables and their distribution by grades, the master made a quick-assembled fence from a board 2 cm thick and 12 cm wide, he saved one board because this device is simply mounted on a wall or in a corner of the room. The design is the simplest and very budget, which is very useful to summer residents. And so let's take a close look at the process of assembling the fence.

Materials

1. The board is 2 cm thick and 12 cm wide
2. wood screws
3. furniture bolt
4. wing nut
5. washer

Instruments

1. jigsaw
2. screwdriver
3. corner
4. pencil
5. drill
6. sandpaper

Step-by-step instructions for creating a quick-mounted fence do it yourself.

And so, first of all, the author prepared all the tools necessary for work, so that in the process everything was directly at hand.
At first, the author sawed off two pieces of 11 cm from a wooden block.Drilled holes with a diameter of 6 mm.On the reverse side, I deepened under the heads of furniture bolts.Then, in boards 120 cm long, I drilled holes with a diameter of 4 mm for wood screws.He made the countersinking under the caps of the screws.I screwed the boards to the prepared bars.Set furniture bolts with wing nuts.Then I drilled 6 mm holes in 175 cm boards.I made a drink with a jigsaw.Joins.Tightens the wing nut.After which the author decided to add another section so that the crop could be distributed by variety.Sawing with a jigsaw.The septum connection is made according to the principle (tenon groove).Putting the design together.You can also adjust the length of the fence.Using this device) it will be very convenient for a summer gardener to dry vegetables and fruits collected from their site.As you see, everything is simple, simple, even a child can do it) Step-by-step instructions are provided for you, so we take and do it. Go for it friends!

That's all, thank you all for your attention!
Come visit often and do not miss the latest in the world of homemade goods!