This stool was made by the author in order to use up the accumulated stock of cardboard boxes brought from the store. Also, the master is a fan of historical facts and objects associated with it. Before starting work, a lot of documentaries, recordings and articles were studied.
Also, the main goal of the work is of course to achieve absolute uniqueness, so that this stool has no analogues in the world)) Atomic stool))
The base is made of 10 mm thick plywood, 4 holes are drilled in it, into which 4 threaded rods are inserted. Then, individual parts are cut out of the cardboard and assembled into a stacked structure, each part is smeared with wood glue diluted with water. The upper part is also made of plywood, and a round soft seat is installed on top.
From the outside, the stool body is finished with putty, and then painted and a warning sign of radiation hazard is applied.
Let's consider what exactly is needed for the manufacture of this stool?
Materials
1. plywood 10 mm
2. cardboard
3. wood glue
4. stud 4 pcs
5. swivel mechanism
6. soft seat
7. screws
8. putty
9. paint
10. pattern drawing
Instruments
1. jigsaw
2. drill
3. putty knife
4. brush
5. scissors
Step-by-step instructions for creating an atomic stool do it yourself.
As already mentioned above, the stool was made of cardboard and plywood, the author has accumulated a decent supply of cardboard boxes)
Using a 3D computer program, a drawing was made.
Step-by-step instructions are provided for you, so we take and do it. Go for it friends!
That's all, thank you all for your attention!
Come visit often and do not miss the latest in the world of homemade goods!