This lamp is quite simple to assemble with an initial knowledge of electrics. To create it, an ordinary small plywood box was taken, it must be sanded with sandpaper and covered with stain to give an aesthetic appearance. 4 holes are pre-drilled to install cartridges. The wires are connected and Edison's lamps are screwed in.
Such a lamp, as it were, is a reminder from the past, because it was Edison who invented the first incandescent lamps launched into production. The beginning of the era of electricity and lighting, by the way, the scientist liked to say these words: "We will make electricity so cheap that only the rich will burn candles." Today it is difficult to imagine everyday life without electricity and electrical appliances.
Let's look at how this wonderful lamp was created.
Materials
1. plywood box (box)
2. Edison lamp 4 pcs
3. cartridge 4 pcs
4. electrical wire
6. stain
7. circuit breaker
8. fork
Instruments
1. drill with a core drill
2. screwdriver
3. pliers
4. brush
5. drill
Step-by-step instructions for making a lamp with Edison lamps do it yourself.
The first step is to prepare all the necessary parts and tools, so that in the process you have everything at hand.After that, a plywood box is taken and marking is made for drilling holes with a core drill.
In the end part of the box, another small-diameter hole is drilled for laying an electric wire.
Step-by-step instructions are provided for you, so we take and do it. Go for it friends!
That's all, thank you all for your attention!
Come visit often and do not miss the latest in the world of homemade goods!