Materials and tools :.
1. Wooden board 130 mm long, 70 mm wide.
2. Two bars 25 mm by 25 mm, width 70 mm.
3. Hacksaw.
4. hammer.
5. 4 nails 30 mm long or 30 mm screws as well.
6. The skin.
1 step.
You need to knock one bar to the edge of the board. Here as shown in the photo.
2 Step.
Now exactly the same from the other end. That's what you should get.
3 Step.
All this is sanded with sandpaper and trim the edges.
That's all the stand is ready, I recommend you make two stands at once in order to rest the board on both,
it will be more convenient.
Here is an example of its use:
