I made this stand in almost 5 minutes, but I searched for a long time and barely found it. Such a stand is probably the easiest, but you can quickly make it well, in short, this one may come in handy homemade .
Tools and materials:
1. 3 Planks measuring 210 mm long, 45 mm wide, 3 mm high.
2. 2 Planks measuring 210 mm long, 50 mm wide, 3 mm high.
3. The skin.
4. Super glue.
5. The file.
Here are two options. I will not do the first option, but I will do and show the second option.
1 option.
Option 2 .
1. Step. Everything is as usual, sand the boards and even trim the edges for beauty.
2. Step. From the beginning we put two wide boards horizontally. Here is as shown in the photo.
3. Step. Then we glue the board vertically slightly at an angle as shown in the photo.
4. Step. We paste the last two boards in exactly the same way as the first.
5. Step. Now we glue the third board and the whole stand is ready.
That's all we made a hot stand, now it can be immediately used for its intended purpose.