Today I will make a stand for all sorts of drills and other objects of this kind, for example: pencils, washers for a screwdriver and much more. This homemade I did two and a half hours, but it turned out fine, I did not even expect it to happen.
Materials:
1. A little board (12.5 cm long, 7.5 cm wide and 1.3 cm thick), but you can round it up.
2.2 sticks (13 cm long, 3.3 cm wide and 1 cm thick).
3. The board is something like a bar (4.5 cm long, 4 cm wide and 2.5 cm thick).
4. Copper wire 16 cm or 15 cm long.
5. 4 nails 3 cm or 4 cm long, but smaller is better.
6. A branch with a diameter of 4 mm and a length of 2 cm.
Instruments:
1. The screwdriver.
2. Hacksaw.
3. All the drills you have.
4. Awl.
5. Pencil.
6. The hammer.
7. The skin.
8. The line.
9. Chisel.
10. The knife.
1 step. So from the beginning you need to cut out all the details. First I saw, so to speak, a body for a tank. Then I cut out the tracks. Then I make a tower for him out of a bar.
2 Step. When we saw the body, we begin to sand all its corners so that they are smooth. And still need to sand the entire board.
3 Step. Now on the tracks we smooth out all the corners and not only them. I mean all the other places on the board.
4 Step. We begin to cut the corners of the tower and sand it.
5 Step. We make a hole with a screwdriver with a 4 mm drill in the body and in the tower. In the tower, we do it in the middle, and in the body closer to the edge. And here is another thing that I forgot - it’s necessary to drill a hole in the muzzle tower.
6 Step. We insert a branch with a diameter of 4 mm into the hole in the tower, you can glue it to the tower with glue.
7 Step. Connecting everything to the body is what you should be able to do.
8 Step. We connect the tracks to the body with nails. And in the end this should come out.
9 Step. Then we drill holes for the drills that you want to insert there.
10 Step. We make two small holes on the tracks at a distance of 7.5 cm.
11 Step. We insert the copper wire into these holes and stick it to the glue.
12 Step. We put everything in its place.
That's all this stand will help you not to lose everything that you put there. And you can only leave the tank, but then you need to stop at step 8. Then you can still paint in khaki and varnish.